I have a Mac Mini Early 2009. I'm on El Capitan. According to apple's compatibility table, Windows XP is supported in Boot camp, provided you use your original OSX DVDs to locate the drivers. However, it would appear that the only option offered in boot camp assistant is to install Windows 7. My assumption is that Windows XP can only be installed via boot camp if I have a much older OSX version installed, 10.6.
Or, if by chance the boot camp assistant from 10.6 (3.x) can be installed in El Capitan. The documentation is misleading as it does not specify the starting point I need to be at to install Windows XP via bootcamp, only that I need the original OSX DVD to get started. The XP installation DVD has to contain Service Pack 2. This has to appear on the label in order to successfully install. The Boot Camp Assistant is not required to install ANY version of Windows on ANY Mac.
This application is not Boot Camp. It is just an Assistant. The Boot Camp Support Software is on your original DVD and probably the Snow Leopard installation DVD. A word of warning.
You may find it difficult to download any updates from Microsoft via Windows Update. You will probably have to search the Web for Service Pack 3, then download and manually install. – Jan 17 '16 at 20:07.
I will try to answer your question as best that I can. It is a question of timing. By 2009, Apple was shipping Macs with firmware or offered firmware upgrades that allowed Windows to be installed in BIOS/MBR mode. This firmware is stored in your Mac. The firmware does not change when you upgrade to a new version of OS X. Therefore, the version of OS X currently installed has nothing to do with whether you can run Windows on your Mac. In fact, it is possible to run Windows on your Mac without any version of OS X installed.
To install a particular version of Windows on a Mac, a few timing aspects need to be considered. The Windows installation DVD needs recognize your Macs hardware in order to install the drivers needed to install and boot to Windows. Since Windows XP was released in 2001, one should not expect the DVD (or maybe CD) to contain the drivers for the 2009 Mac models.
Granted, to a certain extent, hardware can be designed to operate in a legacy mode in order to install an older operating system. When the difference is 8 years, this is difficult to do. Also, Microsoft installations allow for newer drivers to be introduced during the installation process, but this was never employed for Windows installations on Macs in 2009. Instead, Microsoft released Windows XP DVDs with Service Packs already installed. These newer DVDs contained the drivers need to allow Windows to install and boot on Macs. Once, Windows was up and running, better drivers could be installed to upgrade existing drivers and support other hardware such as the camera and sound.
These drivers were part of a package referred to as 'The Boot Camp Support Software'. This software also provided a way to boot back to OSX and a utility to update Apple software such as iTunes. When 'The Boot Camp Support Software' installs, the Windows partition is renamed BOOTCAMP. For this reason, it has become customary to refer to the Windows installation on a Mac as Boot Camp. In fact, you can rename the partition to anything after installing 'The Boot Camp Support Software'. Apple's web site says you can install Windows XP on your Mac.
Whether you need SP2 or SP3 included on the DVD is just a matter of timing. I do not have an answer. SP2 was released in 2004 and SP3 can out in 2008. Since SP3 was the last offered for XP, such a DVD should work for you. Although your question did not ask about installing a newer version of Windows, I will include my thoughts anyway. Generally, Microsoft does not require new drivers for each release of Windows. For example, when upgrading Windows, the newer version just adopts the drivers from the previous version.
Also, Microsoft may offer new drivers though Windows Update. Windows 10 appears to have he ability to connect to the internet and download drivers during the installation process.
Apple's web site reports your Mac can only run 32 bit XP, Vista and Windows 7. This probably is not true. You have a 2.0 GHZ Core 2 Duo 2.0 processor. I am writing this answer on a 2007 iMac with a 2.4 GHz Core 2 Duo processor.
The operating systems is Windows 10 Pro 64 bit. Apple is not entirely wrong. The Boot Camp Assistant will not let you install the newer Windows operating systems, but you don't have to use the Boot Camp Assistant. I guess your complaint is the Boot Camp Assistant version that comes with El Captain OS X 10.11 will not let you install the older XP operating system.
Again, the Boot Camp Assistant is just an assistant used to make windows easier to install. It does not have to be used. You can install Windows XP along with OS X El Capitan using a swap disk trick. You will need to have both a Windows XP cd-rom and Windows 7/8/10 DVD, and a USB drive.
You will also need the original Mac OS X DVD that came with your Mac Mini to install the Windows XP drivers. If you don't have the Mac OS X disc that came with your Mac Mini, you can download the drivers from the Apple site.
First insert the Windows 7 DVD, and a blank USB Thumb Drive into your Mac Mini. Then launch the Boot Camp Assistant. Continue to proceed with Boot Camp and allow it to download the software and also selecting the size for your partition.
When the Boot Camp Assistant is finished with partitioning the hard drive, it will reboot; when it does, immediately hold down the 'OPTION' key. When the Mac Mini reboots, you will be taken to a screen where you can decide what to boot to. At this point, eject the Windows 7/8/10 DVD, and insert the Windows XP cd-rom. Wait a few seconds and the cd-rom will appear on the screen. Select it and press 'Enter' to boot to it.
From here, you will install Windows XP as normal, ensure that when you go to select the drive to install, select the drive labeled as BOOTCAMP. Once you have selected the BOOTCAMP partition, you can do a quick format to NTFS. Do not try to re-partition or delete the partition. Just go through the rest of the installation process as normal. Once Windows XP is installed, you will need to insert the Mac Mini's Mac OS X Install DVD that came with your Mac Mini to install the Windows XP Drivers. Once that is complete, you will need to update the 'Boot Camp Control Panel' utility on Windows XP by launching the 'Apple Software Update' program found on the Start menu. Continue to run the update, until it no longer finds updates for the 'Boot Camp Control Panel' utility and the 'Apple Software Update'.
To boot back to your OS X, you can either reboot the Mac Mini and hold the 'Option' key to select your OS X partition, or you can launch the 'Boot Camp Control Panel' from the task bar, and on the 'Startup Disk' tab, select 'Mac OS X on disk 1' and click 'Restart'. If you do not see 'Mac OS X' listed as a startup system, ensure that you have updated the Boot Camp Control Panel as described in the previous step.
Brother QL-500 Labels Software Driver Download Brother QL-500 Brother QL-500 Driver Mac, Linux, Windows 10, 8, 8.1, 7, Xp, Vista 64-bit 32-bit, Brother QL-500 Installation Software, Reviews - You are able to connect it from you to another size tag rolls in the ease. In any case, it is able to work quickly with 50 mailing labels in a single minute. For its design, it is larger than other tag printers are. Nevertheless, it provides you software that is more complicated. Moreover, it got a faster speed with the various label formats. This stage makes it easier than many label printers perform. Even better, it's possible that you change the format into another easily and quickly.
Has a larger footprint when compared with the normal label printer for office. Though the software is complex, it provides you many advantages if you take some time to learn.
The thing you have to emphasise about this system is it is not a label printer only. This machine can print on the labels over 2.4-inch and the cost of this machine are affordable. We can say that Brother layouts Brother QL-500 using the unusual design because it can handle many labels. It can handle continuous rolls. It's seven precut sizes like optical-disc labels, shipping, and address. In any case, the built-in manual paper cutter makes you cut the continuous roll labels easily. The ideal point of this Brother QL-500 is that you can install it easily.
It works quicker that may do 50 address tag in one minute. When you print one label, it's the label roll with all the authority. We can say that it enables you to print individual labels faster than the competitors. Even though it does not spare the time, but it seems fine that you don't have to wait too long for labels. The next interesting thing concerning Brother QL-500 is your software improvement.
It's easy to install but it's the intricate software. Therefore, you should spend your own time to learn.
You can't change the format to the label immediately. Here, you need to learn the program first. Following that, you can use it readily.
In the long run, Brother QL-500 has a bit larger design in comparison to other printers using the software that is more complex. Nonetheless, you will love its rapid speed with the various label formats it can handle. You're able to change 1 format to other choices easily and quickly. Though it's a bit expensive than its rivals, it does not force you to regret. It is the ideal choice when you're working with various tagging tasks for your business development. You have to check that your printer is on.
After that, look at the toner cartridges by opening the printer lid. Continue by pressing and holding the Asterisk key within 5 seconds. Next, see the LCD. A new menu should appear. Choose the cartridge that you want to reset, K = Black, C = Cyan, M = Magenta, Y = Yellow. STD = Standard Capacity Cartridge, HC = High Capacity Cartridge, SHC = Super High Capacity Cartridge.
You will see the word “Reset?” on your screen. Therefore, you should choose “Yes”. You can close the printer lid. First, hit the menu button on your machine. Then, use the bottom up button to find network menu. And then, hit ok.
After that, choose factory reset, and then hit ok. Next, select number 1 (If your printer has fax button. Otherwise, follow the instruction on the screen). Your printer is going to reset the network automatically. Then, you should do wizard setup to activate the wireless. Continue by pressing the menu button by using the bottom-up button to find “network” and ok. Choose “WLAN”.
Then, press ok. Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID.
Once this process is done, hit back. After completing the steps, the Wi-Fi icon will appear at the top of the screen. Insert the CD driver.
Select the language. Next, choose the “initial installation” menu. Then, select “install MFL-Pro Suite”.
Select yes and wait for a moment. After that, continue by choosing wireless network connection. Then, choose next.
Check all the options and choose next. If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to re-start your device. On the other hands, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
Fill your IP address in your computer on the blank column. Here, you can check the IP address in your computer: choose menu network Wlan TCP/IP IP address. If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.